تجاوز إلى المحتوى الرئيسي
Submitted by admin on 10 June 2024

ماسونري جراوت فيلر

جراوت بناء مسبقة الخلط

<p>Masonry Grout Filler is a ne grout category de ned by American Concrete Institute (ACI), and is composed of portland cement, natural sand, selected ne aggregates, and special additives. The Masonry Grout Filler contains admixtures following ASTM C 476, C207, C260 to meet the ne grout category. Masonry Grout Filler is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce pourable grout. Masonry Grout Filler is ideal for grouting masonry blocks, masonry units, cores, and a ller behind marble slabs.</p>

Uses

  • Apply Masonry Grout Filler on cement-based masonry blocks, masonry units, behind marble and cement panels, tiles or slabs, etc. 
  • Masonry Grout Filler is suitable for the application behind gypsum boards.

Advantages

  • Factory controlled pre-blend ensures consistently high quality. 
  • Requires only the addition of water on-site at the time of usage. 
  • Suitable for ME harsh weather conditions. 
  • Easy application with uniform work flow enables high productivity & superior finishing. 
  • Strong adhesion. 
  • Good mechanical resistance. 
  • Excellent workability.

Usage Instructions

The surface should be sound, clean free from loose materials, grease, laitance, dust, etc.

For the preparation of masonry grout mixture, pour into a container 6.5 - 8 liters of water for each 50 Kg bag of Masonry Grout Filler. 

Slowly add the powder to the water while mixing with an electric drill tted with a suitable paddle for 2 minutes. Then continue mixing at medium-high speed for another 2-3 minutes until achieving a uniform, lump-free pourable consistency mix. The total mixing time is 4-5 minutes approx. 

Please do not add water to the mix once it starts to stiffen.

Apply Spatter Dash SB prior to the application of Premix Plaster S.

Pour the mixed material into the gap between masonry blocks, cement panels, or behind marble or gypsum board within the open time of 30-45 min. 

Avoid air entrapment between the gaps while pouring the grout material. 

For high lift grouting, the mixed material should be pumped or poured from a height to ensure the desired grout ow spread smoothly within the gaps. 

We recommend using a mechanical grout pump for masonry grout placement as it will give more e cient lling and help in grout pumping in high rise structures.

Clean all tools immediately after nishing by water. Clean hardened materials mechanically.

EXPLORE MORE PRODUCTS

بريمكس بلاستر ال دبليو

لياسة خفيفة الوزن لأسطح AAC

Premix Plaster LW

Light Weight Plaster for AAC Surfaces.

بريمكس بلاستر اس اف

لياسة إسمنتية مسبقة الخلط مع ألياف