Submitted by admin on 10 June 2024

ڤيتوبرايم سيبي 436

مثبط للتآكل.

<p>Vetoprime CP436 is a two-component, polymer-modified, cementitious primer designed to enhance the bond between the concrete-repair range of repair mortars and existing reinforced steel. Vetoprime CP436 is also designed to protect the steel reinforcement by providing a highly alkaline passivating layer around the reinforcement and migrating corrosion inhibitor technology, which minimizes further corrosion to surrounding steel reinforcement.</p>

الاستخدامات

  • Ideally designed as corrosion protection for steel reinforcement in the concrete repair systems.
  • For steel reinforcement accepting cementitious repair or concrete.

المزايا

  • Two component, easy to use.
  • High bond strength to concrete and steel.
  • Good physical properties and mechanical strength.
  • Polymer modified system with low VOC.
  • Protection of steel through Migrating Corrosion.
  • Inhibitor technology.
  • Good resistance to water and chloride penetration.
  • Safe and environment friendly.

تعليمات الاستخدام

It is essential to apply Vetoprime CP436 to a sound, clean, and dry surface to achieve maximum bond strength between substrate and coating/repair products.

All rust and scale should be removed from any exposed steel reinforcement by grit blasting techniques or equivalent approved methods until the steel is in a bright condition.

Mix Vetoprime CP436 by slowly adding the powder component to the liquid component. Mix thoroughly for about 2 minutes until a smooth and even consistency is achieved.

Apply two coats of Vetoprime CP436 in a 1 mm thickness approximately) using a brush. Allow each coat to reach the initial setting before the application of the second one.

Clean all tools & equipment with water immediately after use.

تحميل

استكشف المزيد من المنتجات

Plastering Bond

Bonding agent and admixture for render and plaster.

المواد الرابطة وطبقات الأساس

بوند اللياسة

مادة ربط وخلط للياسة والرندر

المواد الرابطة وطبقات الأساس