تجاوز إلى المحتوى الرئيسي
Submitted by admin on 11 June 2024

ڤيتوستون فلر

مادة ملء مفاصل الحجر الأسمنتي الملون مسبقة الخلط

<p>Vetostone Filler is a cement-based blend composed of hydraulic binders, selected aggregates, and high-performance additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce cohesive filling mortar. Vetostone Filler is a premium quality product that contains a special adhesion additive. Vetostone Filler can be applied in joints from 5 mm to 50 mm.</p>

Uses

  • Use internally or externally in wet & dry conditions. 
  • Use for heritage and primitive stone wall constructions.

Advantages

  • Factory controlled pre-blend ensures consistently high quality. 
  • Requires only the addition of water on-site at the time of usage. 
  • Suitable for ME harsh weather conditions. 
  • Strong adhesion on a variety of stones. 
  • Strong bond. 
  • Internal & external applications. 
  • Suitable for wet to dry conditions. 
  • Available in Vetonit Standard Colors.

Usage Instructions

The joint should be sound, clean, free from loose material, grease, laitance, dirt, curing compound, etc.

 Before Vetostone Filler application, neutralize the stone and joint suction with clean potable water.

Add to the mixing container 9 - 11 liters of water for each 50kg bag of Vetostone Filler. Add the powder to the water and mix for 3-4 minutes using a mechanical plaster mixer or a low-speed electric drill fitted with a suitable paddle until achieving a uniform, colored lump-free consistency. 

Blend Vetostone Filler manually for small quantities and maintain the correct amount of powder to water. Mix for approximately 1-2 minutes until achieving a homogeneous mix.

Neutralize the suction of the joint and stone with water before applying the mortar. Remove any excess water. 

Use Vetostone Filler to fill the joints between the stones vertically and horizontally using a mason spatula/ trowel. 

After stiffening, give Vetostone Filler a final smoothing to remove protrusions and to eliminate undulations.

Clean all tools immediately after finishing with water. Clean hardened materials mechanically.

EXPLORE MORE PRODUCTS

بريمكس بلاستر ال دبليو

لياسة خفيفة الوزن لأسطح AAC

Premix Plaster LW

Light Weight Plaster for AAC Surfaces.

بريمكس بلاستر اس اف

لياسة إسمنتية مسبقة الخلط مع ألياف