تجاوز إلى المحتوى الرئيسي
Submitted by admin on 16 مايو 2024

ڤيتوريل اكس تي 421

عامل فصل قوالب كيميائي

<p>Vetorel XT421 is a single component, low viscosity pale straw-colored liquid composed of synthetic mineral oils and special varied additives that perform superior to standard oil-based mold release agents. Vetorel XT421 provides the plywood surface with a water repellent film preventing concrete from adhering to the form-work resulting in a smooth, stainless concrete surface.</p>

Uses

  • Vetorel XT421 is used to treat wooden and metal form-work or molds before casting concrete to facilitate form stripping.
  • Minimizing concrete surface blemishes and pinholes.

Advantages

  • Factory-controlled, single component, and easy to use.
  • Stainless fair-faced concrete finish.
  • Ensures easy release reducing damage to molds and form-work.
  • Produces neat concrete surfaces by letting the air & water bubbles rise freely during vibration.
  • Performs all wooden or plywood form surfaces, GRC as well as synthetic or steel forms.
  • Extend usable life of shuttering.

Usage Instructions

Clean all molds and shutter surfaces from deposits of rust, concrete, oil, or other materials. The product is ready to use without any dilution.

Vetorel XT421 is supplied in containers to use at the site without premix operation. Apply Vetorel XT421t by brush, roller, or spraying machine.

Apply Vetorel XT421 on plywood or steel shutter before the first casting. After every use of form-work, the shutter should be recoated lightly with Vetorel XT421.

Do not over-apply Vetorel XT421 on the form-work. Allow excessive material to drain before using the form-work.

Apply the product with a brush or preferably with a sprayer. It is advisable to apply Vetorel XT421 at least two hours before using the shutter for best results.

Consult Saveto technical department for any additional information.

EXPLORE MORE PRODUCTS

ڤيتونيت مركب فواصل الجبس

مركب ناعم عالي الجودة لفواصل الجبس والتشطيب وتسوية ألواح الجبس