تجاوز إلى المحتوى الرئيسي
Submitted by admin on 5 June 2024

ڤيتوتتش تارولين

لياسة خارجية بنقشات زخرفية

<p>Vetotouch Tyrolean is a cement-based decorative finish composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar.&nbsp;</p>

Uses

  • Special Stenciled and textured finishes designed for interior/ exterior application. 
  • As a finish coat for EIFS / ETICS systems. 
  • On plastered, fair-faced concrete surfaces. 
  • On block walls and pre-cast panels. 
  • Apply in 3-6mm thickness. 

Advantages

  • Factory controlled pre-blend ensures consistently high quality. 
  • Requires only the addition of water on-site at the time of usage. 
  • Provides textured and stenciled finishes. 
  • Improved workability and curing 
  • Easy application with uniform workflow enables high productivity and superior finishing. 
  • Strong adhesion on a variety of substrates. 
  • Internal and external applications. 
  • Weather-resistant. 
  • UV stable pigment provides resistance to fading and eliminates the need for additional paint. 
  • Suitable for humid and dry conditions. 

Usage Instructions

The substrate should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc. 

Before the Vetotouch Tyrolean application, wet the entire surfaces with clean potable water. The surface should look damp at the time of the Vetotouch Tyrolean application.

Add to the mixing container 7-8 liters of water for each 25kg bag of Vetotouch Tyrolean. Add the powder to the water and mix with a mechanical plaster mixer or low-speed heavy-duty electric drill fitted with a suitable paddle for 3-4 minutes until achieving a uniform, lump-free consistency. Leave the mixed material to stand for 10min and briefly remix without adding water. For small batch quantities, mix the product manually for approx. 1-2 min or when achieving a homogeneous. Add 0.5 to 1.0 liter of Vetobond AB432 to the mixing water and adjust the water requirement accordingly for each 25kg bag. Follow the same mixing procedure as described above. Use the mixed material within 30-60 minutes. Do not add water once the mixed mortar starts to harden.

Apply Vetotouch Tyrolean in one or two layers up to 6mm/ coat. Apply by hopper Gun or by Terol hand-operated machine. To protect Vetotouch Tyrolean, apply Vetoseal XX772 by brush or spray machine after three days of curing.

It is vital to cure Vetotouch Tyrolean surface with clean potable water 2 times a day for 3 days. During hot and dry conditions, extend the curing period for a minimum of 5-7 days. It will help to obtain high physical properties. An acrylic-based curing compound can be used. To protect the final color look, it is recommended to apply one coat of Saveto Vetoseal product range (contact the technical department for advice).

Clean tools with water before the mortar hardens. After the hardening, remove its residuals mechanically only.

EXPLORE MORE PRODUCTS

Vetotouch Textura

Acrylic Polymer Modified Cement Decorative Finish Coat.

ڤيتوتتش تكستشورا

طبقة تشطيب زخرفية أسمنتية معدلة بالبوليمر الأكريليكي