Skip to main content
Submitted by admin on 19 May 2024

Vetoproof AM764

Single component flexible pure acrylic waterproofing membrane.

<p>Vetoproof AM764 is a single component elastomeric water-based acrylic membrane with versatile waterproofing in residential and commercial construction. The product is available in a variety of colors that are extremely stable in extreme weather conditions. Vetoproof AM764 is an all-cross-linking-acrylic making it resistant to yellowing, color fading, and has excellent dirt-pick-up resistance.</p>

Uses

  • Waterproofing of concrete, asbestos, metal, cement, and gypsum board surfaces.
  • Protecting spray polyurethane foam insulation from UV rays.
  • As a decorative overlay on bituminous membranes and over existing terrazzo tiles.
  • Waterproofing of corrugated sheets and sloped roofs.
  • Exposed roof surfaces.

Advantages

  • Flexible elastomeric product.
  • Easy to use single component.
  • UV and color stable.
  • Excellent weathering resistance.
  • It can be applied over sloped roofs.
  • Easy to maintain.
  • Dirt-pickup resistance.
  • It reflects sun rays, making it a cool roof coating.

Usage Instructions

All surfaces should be dry and free from contamination, such as oil, grease, loose particles, decayed matter, moss algal growth, laitance, and all traces of mold release oils and curing compounds. This is best achieved by lightly grit-blasting the surface. Where moss, algae, or similar growths have occurred, carried out treatment with a proprietary biocide after the grit-blasting process. Remove spalled and deeply disintegrated concrete to sound concrete and repair it with a Saveto Repair System.

Concrete substrates should be at least 14 days old; bituminous substrates should be 3 to 6 months old before overcoating with Vetoproof AM764.

Vetoproof Apply Vetoproof AM764 by brush, roll, or airless spray machine. Prime porous cementitious surfaces with Vetoprime AP443 at the rate of 5 m2 /liter and allow it to dry before applying the first coat. Apply the first coat of Vetoproof AM764 and allow it to cure for 4 - 12 hours depending on the ambient temperature.

Apply the second coat perpendicular to the first coat and allow it to cure.

It is recommended for heavy pedestrian traffic to use fiberglass scrim reinforcement, embedded firmly in the second coat while wet, and a third coat should be applied.

Remove Vetoproof AM764 product from tools, equipment, and mixers with clean water before the initial set. Cured material can only be removed mechanically.

EXPLORE MORE PRODUCTS

Vetoproof UM770

Single Component Pure Polyurethane Waterproofing.

Vetoproof S

Two-component, elastomeric, crack-bridging, cementitious waterproofing membrane.

ڤيتوبروف إس

مادة ذات أساس إسمنتي مكونة من مركبين مرنة مجسرة للشقوق وعازلة للماء