Skip to main content
Submitted by admin on 19 May 2024

Premium Project Fix

High quality ceramic tile adhesive for projects.

<p>Premium Project Fix is a normal cementitious adhesive with slip resistance composed of hydraulic binders, selected aggregates, and special additives. It is supplied as a dry powder in pre-weighed bags ready to use on-site, which requires only the addition of clean water to produce easily workable mortar. Premium Project Fix is ideal for fixing Ceramic Tiles and Terrazzo Tiles. Premium Project Fix is applied in thickness from 3mm to 10mm, depending upon the substrate’s type of tiles and quality. Premium Project Fix is available in white and grey colors.</p>

Uses

  • For ceramic and terrazzo tiles.
  • Tiling on smooth concrete surfaces, CMU, AAC, bricks, plasterboard.
  • Suitable for dry and wet conditions.
  • It can be applied up to 10mm thickness in a single layer.

Advantages

  • Factory controlled pre-blend ensures consistently high quality.
  • Requires only the addition of water on-site at the time of usage.
  • Easy tile installation that enables high productivity.
  • Superior workability.
  • Excellent Adhesion on a variety of tiles available in the local market.
  • Water-resistant.
  • Suitable for internal applications.
  • Suitable for horizontal and vertical surfaces.

Usage Instructions

The surface should be sound, clean, free from loose material, oil, grease, laitance, dirt, curing compound, etc. 

Wet all surfaces with clean water before Premium Project Fix’s application. The surface should appear damp with no water pooling.

For the mortar adhesive preparation, pour into a container 14- 16 liters of water for each 50 Kg bag of Premium Project Fix.

Add the powder to the water and mix using a low- speed electric drill fitted with a suitable paddle until achieving a uniform, lump-free consistency. Allow the mixed material to stand for about 10 minutes and remix briefly without adding further water.

Blend Premium Project Fix manually for small quantities and maintain the correct amount of powder to water.

If required, add 0.5 Ltr of Vetobond AB432 to the mixing water, followed by powder’s addition. Use the mixed material within 2 hours. 

Do not add water to the mixture once the mortar adhesive starts to harden.

Spread the mixed mortar adhesive and firmly press it onto the surface that will be tiled; work with a notched trowel. Spread the mortar adhesive to an area that can be tiled within 10-15 minutes. Press the tiles firmly over the mortar adhesive and immediately knock them into the desired position. Adjust the position of the tiles, if required, within its adjustability time of 10-15 minutes after installation.

Allow the installed tiles to remain undisturbed for at least 48 hours. Mortar adhesive must not rise between the tile joints higher than halfway the thickness of the tiles. It is recommended to use Vetonit Tile Grout to fill the joint gaps after 2 days of tile installation.

Clean tools and equipment with water immediately after use. Hardened materials will require removal by mechanical means.

EXPLORE MORE PRODUCTS

Ceramic Tile Fix

Cementitious adhesive with slip resistance.

غراء بلاط السيراميك

غراء إسمنتى مقاوم للإنزلاق

Pool Fix

Cementitious Adhesive for Pools (C2 TE S1).