Skip to main content
Submitted by admin on 19 May 2024

Turathco AC

Two-component acrylic emulsion-based traditional decorative coating, for a natural clay pattern design.

<p>Turathco AC is a two-component acrylic emulsion-based, traditional decorative coating with varied historical collections that offers an attractive appearance, an ancient, heritage look, and simulates the look of ancient mud houses.</p>

Uses

  • For decorative purposes on external facade systems.
  • For decorative purposes for houses wall, internally and externally.
  • Designed for new and old walls, concrete and plasters.

Advantages

  • Excellent adhesion and superior durability.
  • Excellent weathering resistance.
  • It can be applied in many shapes and profiles.
  • Gives a traditional pattern to replicate the natural design found in traditional mud houses.
  • High adhesion strength to concrete, cement, wood, steel, and brick surfaces.

Usage Instructions

All surfaces should be dry and free of contamination, such as oil, grease, loose particles, decayed matter, moss, algae growth, and all traces of mold release oils and curing compounds. This is best achieved by lightly grit-blasting the surface. Where moss, algae, or similar growths have occurred, treatment with a proprietary biocide should be carried out after the grit-blasting process. Spalled and deeply disintegrated concrete should be removed to sound concrete and repaired with a Saveto repair system.

Application tools: 

Manually by hand using gloves.

For interior and exterior applications:

Prior to applying, properly mix the paint with the treated straw fibers.

Apply a single coat of “Turathco AC” to achieve the required film thickness.

Create the ideal design based on the client’s preferences.

Allow Turathco AC to dry for at least 7 days before commissioning. At higher temperature 30 °C dry for 4 days. At lower temperature below 12 °C dry for 10 days.

Immediately after the application, clean all tools and equipment with tap water. Hardened material can be removed by mechanical means.

Turathco AC should not be applied at ambient temperature below 5 °C.

Turathco AC should not be applied on surfaces expected to suffer from rising dampness or relative humidity greater than 8% and the relative humidity at work place should not exceed 70%.

Do not apply the next coat unless the previous one is fully dry. Minimum recoating interval time should be followed.

Do not apply on wet and moistened surfaces until completely dry.

Turathco AC should be stirred carefully before use. 

For further information contact our technical team.

EXPLORE MORE PRODUCTS

Vetotouch Textura

Acrylic Polymer Modified Cement Decorative Finish Coat.

ڤيتوتتش تكستشورا

طبقة تشطيب زخرفية أسمنتية معدلة بالبوليمر الأكريليكي

Vetotouch Monocouche

Pigmented Premixed Plaster.