Submitted by admin on 16 May 2024

Vetoprime EP491

Versatile solvent free epoxy based primer.

<p>Vetoprime EP491 is a universal primer for the Vetorep and Vetotop product range. It’s applied on prepared concrete and cementitious substrates to seal the substrate and enhance bonding with topcoats. The product can be used as a stand-alone product in internal applications as a seal coat to harden cementitious surfaces and prevent dusting. Vetoprime EP491 is a two-component solvent-free epoxy resin with sealing properties, making it ideal for concrete substrates.</p>

Uses

  • As a universal versatile primer for resinous flooring and concrete repair systems, especially screeds and self smoothening toppings.
  • As a stand-alone sealer and surface hardener.
  • As a dust proofer for cementitious surfaces. u Sealing of highly porous cementitious substrates.

Advantages

  • Easily applied by brush, roller or spray.
  • Versatile with applications in a large number of coating materials and sealants.
  • Designed for highly porous surfaces.
  • High wetting properties.
  • Perfect for use with epoxy, urethane screeds and self smoothening toppings.
  • Cost effective, suitable for use in MENA region conditions.

Usage Instructions

Vetoprime EP491 must be applied to a sound, clean and dry surface to achieve maximum bond strength between substrate and coating/repair products.

Concrete substrates should be at least 28 days old, and the relative humidity of the concrete is 75% or below. Remove laitance deposits on new concrete by light grit blasting, mechanical scrabbling, or grinding.

Where heavy contamination by oil and grease occurs or existing coatings are present, it is essential to remove all contaminations.

Mix Vetoprime EP491 as supplied. Add the entire content of the hardener container to the base container and mix thoroughly for about 2 minutes. Once mixed, apply Vetoprime EP491 immediately in a thin continuous film using stiff brushes or rollers. Avoid over-application and puddles. 

Allow Vetoprime EP491 to become tack-free before applying epoxy coating (unless otherwise specified) but well within the open time specified for the given temperature. 

The hotter the substrate, the more quickly the primer will become dry.

Clean all tools and equipment immediately after use with Vetonit Solvent XX400.

DOWNLOADS

EXPLORE MORE PRODUCTS

Plastering Bond

Bonding agent and admixture for render and plaster.

Bonding Agents & Primers

بوند اللياسة

مادة ربط وخلط للياسة والرندر

Bonding Agents & Primers

Vetonit Bond Pure

Multipurpose bonding agent & admixture.

Bonding Agents & Primers