Skip to main content
Submitted by admin on 19 May 2024

Vetoproof EC761

Solvent free coal tar epoxy based protective coating

<p>Vetoproof EC761 is a two-component solvent-free tar extended epoxy coating system that adheres perfectly to concrete and metal substrates. Once cured, the product has excellent abrasion and chemical resistance. Vetoproof EC761 provides a hard-wearing and easily cleanable protective coating. Its use on floors, walls, structural elements, and tanks to protect against ingress of contaminants.</p>

Uses

  • Protection of Seawater tanks, channels, and intakes.
  • Pipe and manhole lining.
  • Sewage works and effluent plants.
  • Tanking systems.
  • Foundation waterproofing, Jetties, piers, and docks.

Advantages

  • Versatile use.
  • Does not support algae or bacterial growth.
  • Excellent chemical resistance.
  • Enhances structural life expectancy.
  • Primerless.
  • Protects reinforcement steel and metal substrates against corrosion.

Usage Instructions

The surface should be sound, clean, free from loose material, grease, laitance, dirt curing compound, etc.

Laitance and weak surface layer shall be removed using mechanical methods such as grinding or blasting to provide a sound, well-profiled surface. Repair all necessary repairs before application by using epoxy mortar from the Vetorep ER range. Pinholes, blowholes, and minor irregularities can be leveled and filled by Vetorep ER350.

New concrete floors shall be at least 28 days old with a moisture content of less than 5% (shall earlier application be required testing of substrate for moisture conditions shall be made).

Blast grit steel substrates to surface quality SA2½ (BS 4232:Second Quality), and application shall occur within 2 to 4 hours after blasting.

Thoroughly stir the individual components of Vetoproof EC761 before the two are mixed. Pour the entire contents of the hardener container into the base container and mix the material thoroughly for at least 3 minutes. The use of a heavy-duty slow speed, flameproof, or air-driven drill fitted with a mixing paddle is desirable.

Thoroughly stir the individual components of Vetoproof EC761 before the two are mixed. Pour the entire contents of the hardener container into the base container and mix the material thoroughly for at least 3 minutes. The use of a heavy-duty slow speed, flameproof, or air-driven drill fitted with a mixing paddle is desirable.

Allow the applied to cure for 7 days to achieve full cure to receive its chemical resistance properties.

Remove Vetoproof EC761 from tools and equipment with Vetonit Solvent XX400 immediately after use. Remove hardened material mechanically.

EXPLORE MORE PRODUCTS

Vetoproof UM770

Single Component Pure Polyurethane Waterproofing.

Vetoproof S

Two-component, elastomeric, crack-bridging, cementitious waterproofing membrane.

ڤيتوبروف إس

مادة ذات أساس إسمنتي مكونة من مركبين مرنة مجسرة للشقوق وعازلة للماء