Skip to main content
Submitted by admin on 5 June 2024

Vetotouch Sealer

Decorative protective sealer for cementitious finishes.

<p>Vetotouch Sealer is an environmentally friendly polymeric pore sealer for the decorative products of the Saveto Vetotouch range. The product seals the surface finish to protect against contaminants and water ingress.&nbsp;</p>

Uses

  • Sealing of Vetotouch range of cementitious decorative products. 
  • Finish protection and sealing of cementitious facades. 

Advantages

  • Easily applied by the roll or airless spray. 
  • Protects against contaminants and water ingress. 
  • Designed to work with cementitious finishes and Vetotouch range of products. 
  • Cost effective, suitable for use in MENA region weathering conditions. 

Usage Instructions

The surface must be sound and thoroughly clean by compressed air before applying Vetotouch Sealer. 

Apply Vetotouch Sealer as a continuous flood coat using either a soft brush or low-pressure spray equipment at the correct coverage rate. For best performance, apply a flood of 2 - 3 coats at 3 m2 per liter per coat. 

Clean equipment and tools using clean water immediately after use. If residual material exists or hardens, mechanical means such as wire brush would be required to remove residue.

EXPLORE MORE PRODUCTS

Vetotouch Textura

Acrylic Polymer Modified Cement Decorative Finish Coat.

ڤيتوتتش تكستشورا

طبقة تشطيب زخرفية أسمنتية معدلة بالبوليمر الأكريليكي

Vetotouch Monocouche

Pigmented Premixed Plaster.