Skip to main content
Submitted by admin on 18 May 2024

Vetotop US172

Heavy-duty polyurethane hybrid flooring system.

<p>Vetotop US172 is a single-layer, seamless, solvent-free, polyurethane-based flooring system. On top of having a textured matt finish, this product possesses excellent chemical &amp; high impact resistances and withstands abrasive wear, direct steam contact, &amp; industrial cleaning practices.</p>

Uses

  • Ideal for mechanical and chemical exposure applications.
  • Can be used in laboratories, and factories (food and Beverage, dairies, cheese and milk production, meat, fish, and poultry processing, etc.)
  • Can be used in commercial and industrial kitchens.
  • For freezer rooms (or any area where thermal shock resistance is required).

Advantages

  • Thermal shock resistance.
  • High abrasion and chemical resistance.
  • Low maintenance cost. 
  • Hygienic, impervious, and easily cleanable.
  • High bonding properties (stronger than concrete cohesive strength).

Usage Instructions

The surface should be sound, clean, free from loose material, grease, laitance, dirt-curing compounds, etc. Laitance and weak surface layers should be removed using mechanical methods, such as grinding or blasting, to provide a sound, well-profiled surface. All necessary repairs should be made before the application process begins (Use the same material for those repairs). New concrete floors should be at least 5 days old and visibly dry (with no standing water on top). Grooves must be cut in concrete to control shrinkage. Contact Saveto for more information.

Apply the surface-material that will serve as base for Vetotop US172 directly to sound and non-porous concrete.

Vetotop US172 is supplied in three pre-weighed packs (base, hardener, and aggregate) that are ready for on-site use. Do NOT mix partial quantities as it will affect both the performance and the finished floor’s appearance. Mixing should be done using either a forced action mixer or a heavy-duty mobile mixer fitted with a suitable jiffy-type mixing paddle. The type & capacity of the equipment used should be approved by Saveto.

Mix the components in a suitably sized mixing container. Stir the base and hardener components individually, then empty them into the mixing vessel (scrape the edges) and mix for 2 minutes. 

Slowly, add the content of the graded aggregate pack and mix for another 3 minutes until the mixture is completely homogeneous.

Spread Vetotop US172 to a uniform thickness on the primed surface using either a screed box or the edge of a steel trowel. Tamp the material with a wooden float to ensure complete compaction. Finally, finish to a closed & even texture using a steel trowel. Screeding rods are useful to maintain a minimum compacted thickness of 6 mm. Apply the material within the pot life after mixing.

Vetotop US172 doesn’t allow fluids to cross through it when applied as a layer that’s 6 mm thick. Which is ideal in areas where wet areas are common and inconsistent and where a superb degree of cleanliness is necessary

Clean tools and equipment with Vetonit Solvent XX300 immediately after use.

EXPLORE MORE PRODUCTS

Vetotop UC363

Traffic Deck Polyurethane Waterproofing Membrane.

ڤيتوتوب يو سي 363

غشاء عزل مائي بولي يوريثان لأرضيات المرور

Vetotop EC498

Solvent-Free Epoxy Coating.